NorthStar 961X Operation And Reference Manual page 185

Creating a route
from existing
waypoints
961 Operations and Reference Manual Rev. D
points to this route at any time, go to the ROUTES screen,
select the route, and press the STOP SAVING ROUTE key.
If you use the default waypoint name, the 961 automatically names
this type of new waypoint sequentially, such as
*SAVED02*
, and so on. The word
waypoint, and the number increases by one each time you save this
type of waypoint. The saved waypoints' numbering reverts back to
*SAVED00*
when the 961 reaches the limit you had set using the
SAVE WPTS
limit, the old waypoint with this same name will be overwritten. This
wrap-around feature keeps the waypoint list from getting filled with
SAVED
waypoints. If the old waypoint was in the trip or in a route,
its coordinates will be kept there as an unnamed waypoint. To
choose how many
automatically recycled, press the
MENU
screen, then press the
To create a new route from existing waypoints:
1. At the ROUTES screen, press the NEW ROUTE key.
The CREATE A NEW ROUTE dialog box appears.
NOTE:
DISPLAY SETUP
function at the
SAVED
waypoints the 961 retains before they're
STAR
DISPLAY SETUP
Chapter 8 - Creating Routes
*SAVED01*
SAVED
designates a saved
screen. At this
key to reach the
key.
Create new route dialog box
,
SETUP
Page 8-13