Table of Contents
Advertisement
Chapter 6 - Creating Waypoints
Editing a waypoint
Editing a waypoint
at the waypoints
screen
Editing a waypoint
at the chart screen
Page 6-14
the RESTORE key to recopy the field you're currently
editing.
3. When you're finished changing the waypoint, press the
DONE key (or press CANCEL to cancel and return to the
WAYPOINTS screen).
The new waypoint is now permanently stored in the data-
base; however, you can edit or erase it any time.
You can change any characteristics of a waypoint at either the
WAYPOINTS screen or the CHART screen.
To edit a waypoint, first you must select it. If you have many
stored waypoints, you'll probably want to use the waypoint
sorting and searching features described earlier in this chapter.
To select and edit a waypoint:
1. At the WAYPOINTS screen, press the CURSOR PAD up or
down to select the desired waypoint.
2. After you've selected a waypoint, press the EDIT key. Press
the CURSOR PAD left or right to move from field to field,
changing the data in any of those fields, including the
comment line, as desired.
3. When finished, press the DONE key to store the changes
to the database and return to the WAYPOINTS screen (or
press CANCEL to return to the WAYPOINTS screen).
If this waypoint is used in the trip or one or more routes,
the 961 will ask whether you want to retain the original
coordinates as unnamed points in the trip or routes, or use
the new coordinates instead.
There are two ways to edit an existing waypoint on the CHART
screen:
•
select a waypoint and actually "drag" it to another loca-
tion. (This function won't let you change a waypoint's
symbol or description.)
961 Operations and Reference Manual Rev. D
Advertisement
Table of Contents
