Table of Contents
Advertisement
Other displays of
waypoints
Sorting the list of waypoints
961 Operations and Reference Manual Rev. D
The WAYPOINTS screen lists all your existing waypoints,
showing symbol, name, distance from your present position,
bearing, and lat/lon or TDs and GRI.
To select a waypoint (indicated by the horizontal stripe), press
the CURSOR PAD up or down.
To the right of the LONGITUDE column is a red vertical slide
bar, which is relative to the size of the list of waypoints. The
smaller the slider, the larger the list; the larger the slider, the
smaller the list. The slider also indicates your position in the
list, i.e. at the top, in the middle, at the bottom, or anywhere
else in between.
In addition to the WAYPOINTS and CHART screens, you also
can display past, active, and future waypoints in today's trip
(on the TRIP screen), and you can display the active waypoint
(the waypoint the 961 is navigating to) on the CHART screen
INFO BARs and on both STEER screens. These screens are
explained in separate chapters, however. For details about dis-
playing waypoints on the TRIP screen, see "Displaying the trip"
starting on page 11-3. For details about displaying waypoints
on the steering screens, see "Steering to a waypoint" starting
on page 10-2.
You can sort the waypoint list by the following:
•
symbol
•
name
•
distance from your present position
•
bearing
At the WAYPOINTS screen, press the CURSOR PAD left or
right to select the particular sort field (whenever you sort the
waypoints list, you retain the currently selected waypoint).
Chapter 6 - Creating Waypoints
Page 6-5
Advertisement
Table of Contents
