Chapter 13 - Customizing Setup Functions
Enabling/disabling
individual waypoint
symbols
Page 13-24
•
clearzoom
•
predictor line
•
the display of loran data on the INFO BARs
•
range rings
•
distance scale
•
past trip legs
•
chart update regions
Each of these options is described in detail below.
If you're viewing and editing information on the
screen, and you press one of the five function keys to view other
data, the 961 immediately cancels your edit-in-progress so that you
can view the data requested by your function keypress. To resume
editing at the
screen and re-enter the data that you lost when you pressed the
function key. To purposely cancel an edit-in-progress, you'd usually
CANCEL
press the
You can enable or disable the display of waypoint symbols on
the CHART screen. After you enable certain waypoint symbols,
you must ensure that the display of waypoint symbols is
turned on at the WAYPT DISPLAY field (see "Displaying way-
point symbols and names" starting on page 13-25).
To enable or disable individual waypoint symbols:
1. At the CHART SETUP screen, press the WAYPTS key.
The CHART SETUP screen (for waypoints) appears.
NOTE:
CHART SETUP
screen, you must return to that
key.
961 Operations and Reference Manual Rev. D
CHART SETUP