Table of Contents
Advertisement
961 Operations and Reference Manual Rev. D
The EDIT ROUTE screen comprises two sections: At the top
half of the screen, the right side shows a list of the selected
route's waypoints and legs; the left side shows a graphical rep-
resentation of this route. (To the right of the NEXT LEG col-
umn is a red vertical slide bar, which is relative to the size of
the list of existing waypoints in the route. The smaller the
slider, the larger the list; the larger the slider, the smaller the
list. The slider also indicates your position in the list, i.e. at the
top, in the middle, at the bottom, or anywhere else in
between.) The bottom half of the EDIT ROUTE screen displays
all the waypoints in the 961's database; these waypoints are
identical to those shown on the WAYPOINTS screen.
Press the MOVE UP and MOVE DOWN menu keys to highlight
the route's individual waypoints as well as the route legs con-
necting those waypoints; pressing and holding either of these
keys lets the key "auto-repeat," which moves you up and down
the list more quickly than single keypresses. You can either
delete individual waypoints, or insert additional waypoints in
each leg. You can insert waypoints at the beginning, middle, or
end of a route.
You select waypoints to insert into the route from the list at
the bottom of the screen. To select these waypoints from the
961's database, press the CURSOR PAD up or down to high-
light the desired waypoint. You can search for waypoints by
symbol, name, distance, or bearing; just use the KEYPAD to
enter the desired characters into the SEARCH field. To search
by symbol, press the CURSOR PAD left to highlight the SYM-
BOL column, then press the LEFT ARROW or RIGHT ARROW
keys to select the desired symbol.
As you change the route, you'll see the changes in the route's
graphical representation. Even if you don't want to edit a
route, you can still press the MOVE UP or MOVE DOWN keys
to graphically view the location of each waypoint and each leg.
Inserting waypoints at the beginning of a route
1. At the EDIT ROUTE screen, press the CURSOR PAD up or
down to select the waypoint that you want to add to the
route, or search for the desired waypoint as described
above.
Chapter 8 - Creating Routes
Page 8-19
Advertisement
Table of Contents
