Table of Contents
Advertisement
Track predictor line
Display of position
coordinates (loran)
961 Operations and Reference Manual Rev. D
2. Press the CURSOR PAD left or right or press the LEFT
ARROW or RIGHT ARROW to select BEST, BETTER, or
OFF.
3. When done, press the ACCEPT key (or CANCEL to leave
the option unchanged).
4. Press RETURN to go back to the SETUP MENU screen.
You can adjust the length of the track predictor line on the
CHART screen. The predictor line displays your vessel's pre-
dicted track line and the point you'll reach at your present
SOG and COG. You can set the line to one minute, two min-
utes, three minutes, five minutes, 30 minutes, or turn it off.
To change the PREDICTOR LINE setting:
1. At the CHART SETUP screen, press the CURSOR PAD to
highlight the PREDICTOR LINE option, then press the
EDIT key.
2. Press the CURSOR PAD left or right or press the LEFT
ARROW or RIGHT ARROW keys to select 1 MIN, 2, 3, 5, 30,
or OFF.
3. When done, press the ACCEPT key (or CANCEL to leave
the option unchanged).
You can choose whether to display loran coordinates in the
CHART-screen INFO BARs (including the CURSOR INFO BAR).
Choosing Phantom loran simply tells the 961 to display not
only lat/lon in these INFO BARs, but the corresponding esti-
mated TDs as well. Turning off loran coordinates here, how-
ever, won't turn off the display of loran coordinates on the
WAYPOINTS screen or in any dialog boxes.
To turn the display of TDs on or off:
1. Press the CURSOR PAD to highlight the LORAN INFO
BARS option, then press the EDIT key.
2. Press the CURSOR PAD left or right or press the LEFT
ARROW or RIGHT ARROW keys to select either ON or
OFF.
Chapter 13 - Customizing Setup Functions
Page 13-27
Advertisement
Table of Contents
