Table of Contents
Advertisement
Copying a route
961 Operations and Reference Manual Rev. D
3. Press the CURSOR PAD up or down to select the first
waypoint, then press the INSERT key. You can also use
the search function to find the first waypoint.
The 961 adds the first waypoint to the route.
4. For each waypoint you want to add, repeat step #3.
The 961 adds each waypoint to the route, displaying the
graphical representation on the left side of the screen, and
the numerical listing on the right side.
When adding waypoints, you can press the MOVE UP key
and the MOVE DOWN key to select an insertion point in
the route; pressing and holding either of these keys lets
the key "auto-repeat," which moves you up and down the
list more quickly than single keypresses. You can also
press the DELETE key to remove the selected waypoint.
When you've finished adding waypoints, press the DONE
key to return to the ROUTES screen. The route is dis-
played in the list.
To change this route, see "Editing a route at the routes screen"
starting on page 8-17.
You may want to make your dock the first waypoint of a route. This
ensures that, when you reverse the route, the 961 can help guide
you the entire way home—not to a last waypoint still out on the
water.
If a new route will be similar to an existing one, you can copy
the existing route, then change its characteristics to create a
new route. You can copy the existing route's waypoints (in a
normal or reverse direction), enter a new name for the new
route, then, if desired, edit the route.
To copy an existing route:
1. At the ROUTES screen, press the CURSOR PAD up or
down to highlight the desired route to copy, then press
the COPY key.
2. To copy the route in its existing direction, press the FOR-
WARDS key; to copy the route in a reverse direction,
press the REVERSE key.
Chapter 8 - Creating Routes
NOTE:
Page 8-15
Advertisement
Table of Contents
