Table of Contents
Advertisement
961 Operations and Reference Manual Rev. D
The CHART screen appears and the 961 begins navigat-
ing directly to the selected waypoint. Your XTE starts at
zero because you're right on the course line to the way-
point. To see the route in the trip, press the TRIP key (you
may have to press the CURSOR PAD down to scroll
through the future waypoints).
Joining a leg of a route
You can join a route leg and follow the rest of the route, rather
than go directly to a waypoint:
1. At the FOLLOW ROUTE screen, press the CURSOR PAD
up or down to select the route leg you want to join. Note
that you can reverse the direction of the selected route by
pressing the REVERSE DIR key.
2. Press the JOIN NOW key.
The 961 asks you to confirm that you'll remember to press
the SAVE key to store the point where you join the leg.
3. Press the OK key.
The CHART screen appears, and the 961 begins navigat-
ing along the selected route leg. Your XTE is your vessel's
Chapter 10 - Waypoint and Route Navigation
Join leg dialog box
Page 10-9
Advertisement
Table of Contents
