Chapter 8 - Creating Routes
List display
Page 8-4
To see the route displayed on the CHART screen, you may
have to press the OUT key and/or press the CURSOR PAD to
move into the route's area.
The directional arrow markers on the route indicate its present
direction.
Displaying a route's name on the chart screen
You assign each route a name when you create it; see "Creat-
ing a new route" starting on page 8-8. To see the name of the
route on the CHART screen, press the CURSOR PAD to select
any part of the route (either a leg or a point), and its name
appears in the CURSOR INFO BAR (if necessary, press the
LEFT ARROW key or RIGHT ARROW key).
Displaying a route on the routes screen
To display a list of routes, press the WAYPTS/ROUTES key
until you reach the ROUTES screen.
Chart screen with displayed route
961 Operations and Reference Manual Rev. D