Table of Contents
Advertisement
A trip is a sequence of
waypoints, including
past, active, and future
waypoints.
961 Operations and Reference Manual Rev. D
Press the TRIP key to display a list of past, active, and future
waypoints with their lat/lon coordinates, and for past way-
points, the actual time of arrival as day and date or day and
time, as well as distance and bearing between points; and for
active and future waypoints, ETA as day and date or day and
time.
By pressing the CURSOR PAD up and down, you can see all
past and future waypoints.
The TRIP screen has six menu keys—GO TO NEW COORDS,
GO TO SELECTION, ERASURES, SAVE TRIP AS ROUTE,
STOP NAV/RESUME NAV (not shown if no active waypoint),
and DATE-DIST/BRG-TIME—that control the trip functions.
Use the GO TO NEW COORDS key to:
•
put new points in the trip (go to them now or add them to
the end of your trip)
Use the GO TO SELECTION key to:
•
re-use existing points in the trip (active, past, or future
points)
Use the ERASURES key to:
Chapter 3 - Using the Controls
Trip screen
Page 3-17
Advertisement
Table of Contents
