Table of Contents
Advertisement
Time zone
Display of time
Cross-track error
961 Operations and Reference Manual Rev. D
If you're viewing and editing information on the
screen, and you press one of the five function keys to view other
data, the 961 immediately cancels your edit-in-progress so that you
can view the data requested by your function keypress. To resume
editing at the
screen and re-enter the data that you lost when you pressed the
function key. To purposely cancel an edit-in-progress, however,
you'd normally press the
When shipped from the factory, the current time is expressed
as Greenwich Mean Time (GMT). To change the 961's time
zone:
1. Press the CURSOR PAD to highlight the TIME ZONE field,
then press the EDIT key.
2. Press the CURSOR PAD up or down or press the ARROW
keys to select the desired zone.
3. When done, press the ACCEPT key (or CANCEL to leave
the option unchanged).
4. Press RETURN to go back to the SETUP MENU screen.
To change the display of time to either a 12- or 24-hour clock:
1. Press the CURSOR PAD to highlight the TIME FORMAT
field, then press the EDIT key.
2. Press the CURSOR PAD left or right or press the ARROW
keys to select either 12 HR or 24 HR.
3. When done, press the ACCEPT key (or CANCEL to leave
the option unchanged).
4. Press RETURN to go back to the SETUP MENU screen.
You can adjust the cross-track display limits on the STEER
screen and the CHART screen's INFO BARS to suit your
scale
needs—whether you're navigating out in open waters or trying
to maneuver through a tight channel. Cross-track scale is the
total left-to-right distance limit on your screen. For example, a
cross-track scale setting of 1000 feet displays 500 feet on
either side of your track line.
Chapter 13 - Customizing Setup Functions
NOTE:
DISPLAY SETUP
CANCEL
DISPLAY SETUP
screen, you must return to that
key.
Page 13-3
Advertisement
Table of Contents
