Table of Contents
Advertisement
Stopping navigation
961 Operations and Reference Manual Rev. D
3. Press the YES, RESTART HERE key (or press the CAN-
CEL key to cancel).
The 961 goes to the STEER screen showing navigation to
the active waypoint. You're going directly from your
present position to this waypoint.
Stopping navigation means you can travel without onscreen
navigation messages appearing and without unwanted way-
point sequencing. In addition, autopilot commands cease
when stopped. Why stop navigation? If you purposely want to
go off-course, for example, simply stop navigation; when
you're done, you can resume navigation right where you left
off.
To stop waypoint navigation calculations, at the TRIP screen
press the STOP NAV key (this key isn't displayed unless there's
an active waypoint). The 961 displays the message TRIP
STOPPED above the RESUME NAV key. To resume navigation
calculations at any time, at the TRIP screen press the RESUME
NAV key.
Chapter 11 - Using the Trip Function
Restart here dialog box
Page 11-15
Advertisement
Table of Contents
