Table of Contents
Advertisement
961 Operations and Reference Manual Rev. D
Editing a route or the trip
You can edit a route or a trip by adding waypoints to the mid-
dle of a route leg or a trip leg. This function splits a leg into
two new segments.
1. On the CHART screen, press the CURSOR PAD to select a
route leg or a trip leg at the point where you want to add
a waypoint, then press the CURSOR menu key. The
SELECTED ROUTE LEG or SELECTED TRIP LEG dialog
box appears—depending on whether you selected a route
leg or a trip leg, respectively.
2. Press the EDIT key.
The 961 returns to the CHART screen, showing the
selected route leg or trip leg.
3. Press the CURSOR PAD to move the cursor to the desired
location of the waypoint to be inserted.
The 961 displays the tentative location of the new route or
trip leg.
4. Press the DONE key to insert the new point (or press the
CANCEL key to cancel).
The 961 returns to the CHART screen, showing the new
point inserted into the selected route leg or trip leg.
Editing a waypoint
You can select an existing waypoint, route point, or trip point
on the CHART screen, and move it to another location:
1. On the CHART screen, press the CURSOR PAD to select a
waypoint. If necessary, to select a named waypoint or a
waypoint that's part of a route or trip, press the LEFT
ARROW key or RIGHT ARROW key.
2. Press the CURSOR menu key.
The SELECTED WAYPOINT dialog box appears. If you've
selected a trip point or a route point instead of a named
waypoint, this box will be named SELECTED TRIP POINT
or SELECTED ROUTE POINT.
Chapter 4 - Understanding the Chart Screen
Page 4-31
Advertisement
Table of Contents
