Table of Contents
Advertisement
961 Operations and Reference Manual Rev. D
4. Press the CURSOR menu key, then press the STORE AS
WAYPT/ROUTE key.
5. If desired, enter a name for the new waypoint; otherwise,
the 961 defaults to a name starting sequentially as W0000.
6. Press the ADD TO END OF ROUTE key.
The 961 returns to the CHART screen, showing a con-
necting route leg from the old end point to the new end
point.
7 . To add any additional waypoints to the end of the route,
repeat step #3 through step #6.
Adding named waypoints to the end of a displayed route
First, on the ROUTES screen, remember to press the CURSOR
PAD up or down to select the desired route. To display the
route on the CHART screen, press the ON CHART key, then
press the CHART key.
1. At the CHART screen, press the CURSOR PAD to select
the named waypoint you want to add to the route. Note
that you may have to use the LEFT ARROW or RIGHT
ARROW key to select a named waypoint.
2. At the SELECTED WAYPOINT dialog box, press the ADD
TO END OF ROUTE key.
The 961 returns to the CHART screen.
Graphically deleting route waypoints
To permanently delete waypoints from a route (but not from
the 961's database of waypoints):
1. On the ROUTES screen, press the CURSOR PAD up or
down to select the desired route.
2. To display the route on the CHART screen, press the ON
CHART key, then press the CHART key.
3. On the CHART screen, press the CURSOR PAD to select
the route point you want to delete. Note that you must
use the LEFT ARROW key or RIGHT ARROW key to
select, for example, ROUTE POINT 6, not just WAYPOINT
Chapter 8 - Creating Routes
Page 8-23
Advertisement
Table of Contents
