Restarting The Track At The Trip Screen - NorthStar 961 Reference Manual

Chapter 11 - Using the Trip Function
Erasing a single
waypoint

Restarting the track at the trip screen

Page 11-14
To permanently erase all the trip points after the selected one,
but not the selected one (with this option, you can only erase
points after the active waypoint):
1. At the TRIP screen, select the point at which all other
points after it will be erased, then press the ERASURES
key.
2. Press the ERASE AFTER key.
All the selected trip points are erased, and the TRIP
screen appears.
To erase a single trip point:
1. At the TRIP screen, select the desired point.
2. Press the ERASURES key.
3. Press the ERASE CURRENT key.
The trip point is erased, and the TRIP screen appears.
To restart the track from your present position to the active
waypoint (this changes your current track, but not the trip):
1. At the TRIP screen, select the active waypoint.
2. Press the GO TO SELECTION key.
The RESTART HERE dialog box appears.
961/962 Operations and Reference Manual, Rev. A