Table of Contents
Advertisement
Understanding the
alarm audio
961 Operations and Reference Manual Rev. D
To change the alarm settings:
1. At the ALARMS screen, press the CHANGE SETTINGS
key.
The ALARM SETTINGS are highlighted.
2. Press the CURSOR PAD up or down to highlight the
desired alarm setting.
To turn off an alarm setting, press the ALARM ON/OFF
key. When done, press the ACCEPT key (or press CAN-
CEL to leave the alarm on).
To change the distance setting for the cross-track, arrival
radius, or anchor drag alarms, highlight the desired alarm
setting, then use the KEYPAD to enter the distance at
which you want to be alerted. If necessary, press the LEFT
ARROW and RIGHT ARROW to move the cursor into the
desired decimal place. When done, press the ACCEPT key
(or press CANCEL to leave the value unchanged).
The alarm audio for most of the alarms can be turned off,
which means the alarms won't beep for any of those alarm sit-
Chapter 12 - Alarms, TideTrack, and Currents
Alarm settings screen
Page 12-7
Advertisement
Table of Contents
