Table of Contents
Advertisement
Chapter 13 - Customizing Setup Functions
System security
Page 13-6
1. At the DISPLAY SETUP screen, press the CURSOR PAD to
highlight the SAVE WPTS option, then press the EDIT
key.
2. Press the CURSOR PAD left or right or press the ARROW
keys to select either 10, 20, or 100.
3. When done, press the ACCEPT key (or CANCEL to leave
the option unchanged).
The 961 now automatically numbers your *SAVEDXX*
waypoints up to the value you've set, at which point it
begins to overwrite previously saved waypoints. To per-
manently save a *SAVEDXX* waypoint, rename it with an
original name—before the 961 overwrites it.
4. Press RETURN to go back to the SETUP MENU screen.
The 961 lets you enter a new waypoint name just after pressing the
SAVE
key. If you enter a new name, the
permanently stored, not overwritten.
When the 961 overwrites a *
trip or is used in a route, the original coordinates of that point are
retained in the trip or route, and the point becomes unnamed. This
feature ensures that the trip or route isn't changed.
To implement the 961's security system, you must first return
the registration card included with your system. Once North-
star receives this card, you'll then receive the North-
star-defined password for your system. Until you receive this
password, the message on the OWNER'S MESSAGE screen,
which appears as part of the 961's startup process, will read
"SPECIFY YOUR OWNER'S MESSAGE HERE." After you've
received the password for your system, you can now specify
an individual owner's message as well as turn on the 961's
security system. The password-based security system, when
turned on, prevents users from getting past the OWNER'S
MESSAGE screen without entering the proper password.
NOTE:
NOTE:
SAVEDXX*
961 Operations and Reference Manual Rev. D
SAVED
waypoint will be
waypoint that's still in the
Advertisement
Table of Contents
