Editing An Avoidance Point - NorthStar 961X Operation And Reference Manual

Editing an avoidance point

Editing an
avoidance point at
the avoidance
points screen
Editing an
avoidance point at
the chart screen
961 Operations and Reference Manual Rev. D
You can change any characteristics of an avoidance point at ei-
ther the AVOIDANCE POINTS screen or the CHART screen.
To edit an avoidance point, first you must select it. If you have
many stored avoidance points, you'll probably want to use the
avoidance point sorting and searching features described
above.
To select and edit an avoidance point:
1. At the AVOIDANCE POINTS screen, press the CURSOR
PAD up or down to select the desired avoidance point.
2. After you've selected an avoidance point, press the EDIT
key. Press the CURSOR PAD left or right to move from
field to field, changing the data in any of those fields,
including the comment line, as desired.
3. When finished, press the DONE key to store the changes
to the database and return to the AVOIDANCE POINTS
screen (or press CANCEL to return to the AVOIDANCE
POINTS screen).
Editing an avoidance point at the CHART screen lets you select
an avoidance point and move it, thereby enlarging its radius.
1. At the CHART screen, press the CURSOR PAD and if nec-
essary, the LEFT ARROW and RIGHT ARROW keys, to
select an avoidance point, then press the CURSOR menu
key.
2. Press the EDIT key.
The 961 returns to the CHART screen, showing the
selected avoidance point.
3. Press the CURSOR PAD to move the cursor and the
avoidance point to the desired location. Remember: this
location will be the radius.
4. Press the DONE key to store the avoidance point to the
avoidance point database (or press the CANCEL key to
cancel).
Chapter 7 - Creating Avoidance Points
Page 7-13