Table of Contents
Advertisement
Chapter 3 - Using the Controls
Page 3-10
ually clear most alarms, if desired. This key only appears if
there are new alarms present.
•
Use the CHANGE SETTINGS key to turn an alarm on or
off, or to change the alarm distance.
•
Use the DROP ANCHOR key to drop the anchor; use the
RAISE ANCHOR key to raise the anchor.
•
Use the KEY BEEP OFF/ON key to turn off the audio of
the 961's keys—except for the MOB key and the SAVE key
(these keys will always beep).
•
Use the LOUDER key to increase the volume of the alarm
audio.
•
Use the SOFTER key to decrease the volume of the alarm
audio.
Alarms contain information you should read as soon as possi-
ble, including such information as a dragging anchor, lost GPS
signals, or the upcoming arrival at a particular waypoint. The
961 displays alarms at the top of the CHART screen and at the
bottom of other screens. Alarms are accompanied by an alarm
audio unless the audio is turned off.
Chart-screen alarm message
961 Operations and Reference Manual Rev. D
Advertisement
Table of Contents
