Table of Contents
Advertisement
Chapter 13 - Customizing Setup Functions
Page 13-46
7 . Use the KEYPAD to carefully enter the permit, using the
LEFT ARROW key and RIGHT ARROW key as necessary.
Where the + signs are required, you can scroll across
them with the ARROW keys or use the '+' SIGN key to
enter them.
8. Press the OK key (if you made a mistake or entered an
incorrect permit, the 961 will beep and prompt you to try
again).
The 961 now displays the CHARTS ON DISK screen with
this chart marked "load."
9. To load charts, see "Loading HCRF charts" starting on
page 13-39, beginning with step #6 (pressing the LOAD
CHARTS key) and following each step as necessary.
Enter navigator permit dialog box
961 Operations and Reference Manual Rev. D
Advertisement
Table of Contents
