Table of Contents
Advertisement
Chapter 1 - Quick Start
Page 1-26
Option 2 — Entering coordinates
Your second option for navigating to a point is to enter
numeric coordinates as lat/lon, Loran-C TDs, or distance and
bearing, as follows:
1. From the CHART screen, press the GO TO key.
The GO TO COORDINATES dialog box appears. The
coordinates of your active waypoint, if any, or else the
coordinates of your most recent position, are displayed.
2. To change these coordinates, use the KEYPAD to enter
new coordinates: Press the CURSOR PAD right to move
the flashing cursor to the longitude field or press down to
move to the distance and bearing fields, then use the
KEYPAD to enter new coordinates. (For details about
using the KEYPAD to enter data, see "Entering data" start-
ing on page 2-9.) To display the coordinates as lat/lon or
TDs, press the LL/TDS key.
Go to coordinates dialog box
961 Operations and Reference Manual Rev. D
Advertisement
Table of Contents
