Table of Contents
Advertisement
Saving and
restoring your last
saved demo
position
Using the resume
Cancelling demo
mode
961 Operations and Reference Manual Rev. D
5. To accept, press the YES key. To decline, press the NO key.
In either case, the 961 goes to the CHART screen.
As with various other 961 screens, on this
screen, you can display a waypoint's position as either lat/lon or
Loran-C TDs: Press the
lon and TD readings.
You can set demo mode to always start at the same position
rather than defaulting to your most recent position fix: Enter
the desired LATITUDE, LONGITUDE, COURSE, and SPEED
fields in the red/green box at the bottom of the SETUP DEMO
MODE screen, then press the SAVE key. You can now start
demo at any time at the same position, course, and speed set-
tings: if you're not already in demo mode, press the START
key; if you're already in demo mode, press the RESUME KEY.
Now that you're in demo mode, when you return to the
SETUP DEMO MODE screen, if you change your position,
course, and speed settings, you can always press the
RESTORE key to restore your last saved position, course, and
speed settings.
Note that the RESTORE key appears on the SETUP DEMO
MODE screen only after you've pressed the SAVE key.
The RESUME key appears on the SETUP DEMO MODE screen
only if you're already in demo mode and you've returned to
key
the SETUP DEMO MODE screen. If you now make any
changes in the demo setup, such as changing speed, for exam-
ple, you must press the RESUME key for the 961 to accept the
change; otherwise, if you just press the CHART function key,
you'll end up going at the same demo speed as before.
To cancel demo mode at any time, press the CANCEL DEMO
key. To leave the SETUP DEMO MODE screen and return to
the main SETUP MENU screen, press the STAR key two times.
Note that the CANCEL DEMO key appears on the SETUP
DEMO MODE screen only after you've pressed the START
DEMO key.
Chapter 13 - Customizing Setup Functions
NOTE:
SETUP DEMO MODE
TDS, LAT/LON
key to cycle between lat/
Page 13-65
Advertisement
Table of Contents
