Table of Contents
Advertisement
Editing a route at
the chart screen
961 Operations and Reference Manual Rev. D
Deleting route waypoints
To permanently delete individual waypoints from a route (but
not from the 961's database of waypoints):
1. At the EDIT ROUTE screen, press either the MOVE UP or
MOVE DOWN keys to highlight the route waypoint you
want to delete, then press the DELETE key.
2. Repeat step #1 for each waypoint that you want to delete.
3. When finished, press the DONE key to store the changes
to the 961's database and return to the ROUTES screen.
At the CHART screen, you can change a route in the following
ways:
•
graphically move waypoints anywhere in a route
•
graphically add waypoints to a route leg
•
graphically add waypoints to the end of a route
•
delete waypoints from the route
Graphically moving a route's waypoints
1. On the ROUTES screen, press the CURSOR PAD up or
down to select the desired route.
2. To display the route on the CHART screen, press the ON
CHART key, then press the CHART key.
3. At the CHART screen, press the CURSOR PAD to select
the route waypoint you want to move.
The name of the selected route must appear in the CUR-
SOR INFO BAR; to highlight the route's waypoint, you
may have to press the LEFT ARROW and RIGHT
ARROW keys. Pressing these keys lets you select a
named route waypoint, if any, or an unnamed route way-
point, called POINT X.
4. Press the CURSOR menu key.
5. At the SELECTED ROUTE POINT dialog box, press the
EDIT key.
Chapter 8 - Creating Routes
Page 8-21
Advertisement
Table of Contents
