Table of Contents
Advertisement
Chapter 4 - Understanding the Chart Screen
Page 4-28
will add the route starting at the selected point, including
all subsequent points. This procedure also applies to
selecting a route leg: Press the CURSOR PAD to move the
cursor to the desired route leg, and the 961 will add the
route starting at the beginning point of the selected leg,
including all subsequent legs and points. Remember that
you may have to press the LEFT ARROW and RIGHT
ARROW keys to highlight the desired object on the
CHART screen.
2. Press the CURSOR menu key.
The SELECTED ROUTE POINT (or SELECTED ROUTE
LEG) dialog box appears.
3. If desired, to reverse the direction of the route, press the
REVERSE DIRECTION key; if not, check in the dialog box
that you're adding the desired point or leg to the end of
the trip, then press the ADD TO END OF TRIP key (or
press the CANCEL key to cancel).
The 961 returns to the CHART screen showing the route
added to your trip. If you were already past the end of the
existing trip, you'll immediately begin navigating to the
new route.
Selected route point dialog box
961 Operations and Reference Manual Rev. D
Advertisement
Table of Contents
