Viewing GPS status
Changing port
setup
961 Operations and Reference Manual Rev. D
2. Press the CURSOR PAD left or right to highlight 200, 100,
50, or 25 bps.
3. When done, press the ACCEPT key (or CANCEL to leave
the option unchanged).
The 961's GPS STATUS screen lets you see a display of all
available satellites, including their signal strength and your
expected accuracy, as well as the frequency, baud rate, and
status of DGPS transmitters (961XD only). To display this infor-
mation, press the STAR key until you reach the SERVICE
MENU screen, then press the GPS STATUS key.
To go back to an overview of GPS and DGPS, see "Introducing
GPS and DGPS" starting on page 2-13. For details about the
GPS satellite status screen, see "Understanding Position Coor-
dinates" starting on page 5-1.
The PORT SETUP option lets you connect, or interface,
directly with a variety of external devices, such as autopilots,
radars, depth sounders, personal computers, and so on.
Chapter 14 - Service and Maintenance Functions
GPS satellite status screen
Page 14-9