Chapter 1 - Getting Started
Going to a quick waypoint now
Page 16
You can point to any location on the CHART screen and go
right to it. This is called "point-and-shoot" navigation, which
can be the easiest and most powerful way to go to a waypoint:
Just select different locations and go to them, one at a time,
right on the chart. This way of navigating provides the most
flexibility in deciding where you want to travel. Simply move
the cursor wherever you want, press a key, and you're
navigating.
1. Press the CHART function key to display the CHART
screen.
2. Move the cursor to the desired chart location by pressing
the CURSOR PAD in the lower right corner of the 958.
3. Press the GO TO CURSOR menu key at the lower right of
the screen.
4. When prompted with the message START NAVIGATING
TO CURSOR POSITION, press the ENTER key.
958 Operator's Manual, Rev. A