Chapter 1 - Quick Start
On the GPS position
screen
Navigating to a waypoint
Page 12
If you want to display your position in numerical form only
(without showing a chart), press the 326,7,21 function key
located below the display screen.
Your present position, SOG, and COG are displayed, along with
the time of day and date. Press 326,7,21 again to return to
the CHART screen.
To navigate to a "quick," or temporary, waypoint using the
CHART screen:
1. Display your position on the CHART screen. (If you aren't
viewing your position on this screen, press the 326,7,21
function key once or twice until the CHART screen is dis-
played.)
2. Move the cursor to the desired location by pressing the
&85625 3$' in the upper-right corner of the unit. (To
see more area of the chart, zoom out one or more levels.
For greater accuracy in positioning the cursor, zoom in
one or more levels.)
951/952 Operator's Manual Rev. B