Editing An Avoidance Point - NorthStar 961 Reference Manual

Editing an avoidance point

Editing an
avoidance point at
the avoidance
points screen
Editing an
avoidance point at
the chart screen
961/962 Operations and Reference Manual, Rev. A
You can change any characteristics of an avoidance point at
either the AVOIDANCE POINTS screen or the CHART screen.
To edit an avoidance point, first you must select it. If you have
many stored avoidance points, you'll probably want to use the
avoidance point sorting and searching features described
above.
To select and edit an avoidance point:
1. At the AVOIDANCE POINTS screen, press the CURSOR
PAD up or down to select the desired avoidance point.
2. After you've selected an avoidance point, press the EDIT
key. Press the CURSOR PAD left or right to move from
field to field, changing the data in any of those fields,
including the comment line, as desired.
3. When finished, press the DONE key to store the changes
to the database and return to the AVOIDANCE POINTS
screen (or press CANCEL to return to the AVOIDANCE
POINTS screen).
On the CHART screen, you can edit an avoidance point by
moving it.
1. At the CHART screen, press the CURSOR PAD and if
necessary, the LEFT ARROW and RIGHT ARROW keys, to
select an avoidance point (not its radius), then press the
CURSOR menu key.
2. Press the EDIT key.
The CHART screen appears, showing the selected
avoidance point.
3. Press the CURSOR PAD to move the cursor and the
avoidance point to the desired location.
Chapter 7 - Creating Avoidance Points
Page 7-13