Appendix 3 Connection With External Device; Appendix 3.1 Connector - Mitsubishi Electric MELSEC-Q Series User Manual

Appendix 3 Connection with external device

Appendix 3.1 Connector

Mounted onto an external input connection connector of the Simple Motion module
and used for wiring an external device. The "external device connector" includes the
following 3 types.
(1) Connector type
Type
Soldering type
(LD77MHIOCON)
(Note)
Soldering type
Pressure-displacement type
(Note)
(2) Specifications of the connector
Part name
Applicable connector
Applicable wire size
(Note): The external input wiring connector has been prepared. Please purchase them by customer.
Specialized tool
• MDR assembly press for pressure-displacement type
Model name: 10960 (Hand press)
: 10962 (Fixture unit)
: 10963 (Fixture block)
: 10964-1 (Cable clamp (black) 14 - 50 position)
• Contact for the specialized tool:
Sumitomo 3M http://www.3m.com
Quick release metal latch
type
Threaded type
Quick release metal latch
type
(Note): These connectors are not options. Please purchase them by customer.
Soldering type
(Quick release metal latch type/
Threaded type)
AWG30 to AWG24 (0.05 to 0.2mm
Appendix - 17
Type
Connector
10126-3000PE 10326-52F0-008
10126-3000PE 10326-52A0-008
10126-6000EL 10326-3210-000
Specification
Pressure-displacement type
(Quick release metal latch type)
2
) AWG28 (Stranded, 0.08mm
Appendices
Connector case
2
)