Mitsubishi Electric MELSEC-Q Series User Manual page 271

Set with a decimal.
Setting
K 1
value
The Simple Motion module resets the value to "0" automatically
when processing of the skip request completes.
Set with a decimal.
Setting
K
value
Set with a decimal.
Setting value
K
Set with a decimal.
Setting
K
value
Setting value
Skip request
1: Issues a skip request to have
the machine decelerate, stop,
and then start the next positioning
operation.
Teaching data selection
0: Takes the feed current value as a positioning
address.
1: Takes the feed current value as an arc data.
ABS direction in degrees
0: Takes a shortcut.
(Specified direction ignored.)
1: ABS circular right
2: ABS circular left
5 - 151
Chapter 5 Data Used for Positioning Control
Default
value
0
0
0
Teaching
positioning
data No.
1 to 600
0
Buffer memory address
4347+100n
4348+100n
4349+100n
4350+100n
n: Axis No.-1