Mitsubishi Electric MELSEC-Q Series User Manual page 337

Setting item
Position-speed switching
[Cd.25] control speed change
register
Position-speed switching
[Cd.26]
enable flag
: Refer to Section 5.7 "List of control data" for details on the setting details.
(4) For "position-speed switching control", set the control data shown below.
(As required, set the "[Cd.25] Position-speed switching control speed change
register".)
Setting
value
Used to set a new value when speed is changed
during positioning control.
To validate position-speed switching signal, this
1
is set to 1.
Chapter 6 Sequence Program Used for Positioning Control
Setting details
6 - 55
Buffer memory address
4330+100n
4331+100n
4332+100n
n: Axis No.-1