Mitsubishi Electric MELSEC-Q Series User Manual page 362

Area name
Parameters validated when PLC READY
signal [Y0] changes from OFF to ON
Parameter area (a)
Parameters validated when the TO
command is executed from the CPU
Parameter area (b)
module (validated when the next control is
started after the TO command is executed)
Parameters validated with power supply
Parameter area (c)
ON/CPU module reset
Data is backed up
here.
Flash ROM
Parameter area (a)
Parameter area (b)
Parameter area (c)
Positioning data area
(No.1 to 600)
Block start data area
(No.7000 to 7004)
Internal memory
(nonvolatile)
Servo parameter area
(MR-J4-B use)
Chapter 7 Memory Configuration and Data Process
User accesses
here.
Buffer memory/Internal memory
Parameter area (a)
Parameter area (b)
Parameter area (c)
Positioning data area
(No.1 to 600)
Block start data area
(No. 7000 to 7004)
Servo parameter area
Monitor data area
Control data area
CC-Link IE Field
Network area
QD77GF
Description
[Pr.1] to [Pr.7], [Pr.11] to [Pr.24],
[Pr.43] to [Pr.57], [Pr.80] to [Pr.83], [Pr.89],
[Pr.90], [Pr.95], [Pr.801], [Pr.805] to [Pr.807]
[Pr.8] to [Pr.10], [Pr.25] to [Pr.41], [Pr.84]
[Pr.96], [Pr.101], [Pr.113], [Pr.132],
[Pr.800] to [Pr.807]
7 - 4