Navigating To Waypoints - NorthStar 941X Reference Manual

Navigating to
Waypoints
Rev. D
You can specify a waypoint to navigate to, and store it perma-
nently in the 941X's database in one operation, if you like.
While in the QUICK WAYPT entry screen, just move the cur-
sor arrow up to the waypoint's name and change it from
-QUIK- to its permanent name before pressing ENTER . To
make a previously-entered QUICK waypoint become a perma-
nent waypoint, just go to a waypoint list screen and edit the
name (and description, if you wish).
To navigate to a waypoint already stored in the 941X, first display it us-
ing one of the four waypoint list screens: press WAYPTS/ROUTES, then
the WAYPT LIST menu key. Use the up and down cursor arrow keys to
move the large arrow on the left of the screen so that it points to the
waypoint you want to navigate to. Then press the GO TO menu key, and
then ENTER.
Since the waypoints you navigate to are usually nearby, the
LOCAL waypoint list is often the best list to use for finding the
waypoint in the database.
The 941X will automatically switch to the STEER display to show infor-
mation for navigating to the waypoint. You can also press the STEER key
to display this information at any time. Two versions of the screen are
available to choose from.
5 — Waypoint and Route Navigation 5 — Waypoint and Route Navigation 5 — Waypoint and Route Navigation 5 — Waypoint and Route Navigation
WAYPOINT TIP
WAYPOINT TIP
Page 55