Using The Cursor On The Chart Screen - NorthStar 6000i Quickstart Manual And Reference Manual

Using the cursor on the chart screen

Press the cursor pad to display the
red cursor symbol on the
screen. Continue pressing the
cursor pad to move the cursor across the
screen.
When you press the cursor pad, the 6000i
switches to browse mode, described on
page 28.
If you move the cursor onto a
waypoint or navaid, that point is
selected, as indicated by a
diamond-shaped box around the
point. Information about the selected point
appears in the info bar at the bottom of the
screen.
After pressing the cursor pad to move the
cursor to a point on the chart, you can
press
navigating to the designated cursor
location.
Reference Manual Revision D
CHART
If you have trouble finding the cursor in a
busy part of the screen, just look
CHART
at the edges of the screen for the red cur-
sor pointers: They line up with the cursor.
Go to cursor and
ENTER to start
If you placed the cursor on a waypoint or
nav aid, this menu key would read
waypt Go to nav aid
or .
Selecting a navaid with the cursor
You can use the cursor to:
• select a nav aid or waypoint, to:
>
show its name, lat/lon, and distance
and bearing
>
navigate to it
>
add it to a route
• designate a point on the chart, to:
>
show its lat/lon
>
navigate to it
>
add it to a route
>
store as a waypoint
• select a leg of a route to follow or edit
Go to
• view a new area of the chart by moving
the cursor to the edge of the screen
Reference section 1 — Using the Chart Screen

Using the cursor on the chart screen

27