Internal Registers Of Can Controller; Can Module Register And Message Buffer Addresses - NEC V850ES/F 3-L Series User Manual

CAN Controller (CAN)

18.5 Internal Registers of CAN Controller

18.5.1 CAN module register and message buffer addresses

Table 18-17
Base address name
C0RBaseAddr
C0MBaseAddr
In this chapter all register and message buffer addresses are defined as
address offsets to different base addresses.
Since all registers are accessed via the programmable peripheral area the
bottom address is defined by the BPC register (refer to "Programmable
peripheral I/O area" on page 153 or to "Programmable peripheral I/O area
(PPA)" on page 297).
The addresses given in the following tables are offsets to the programmable
peripheral area base address PBA.
The setting of BPC is fixed to 8FFB
peripheral area base address
PBA = 03FE C000
Table 18-17 lists all base addresses used throughout this chapter.
CAN module base addresses
Base address of
CAN0 registers
CAN0 message buffers
In the following <CnRBaseAddr> respectively <CnMBaseAddr> are used for
the base address names for CAN channel n.
User's Manual U18743EE1V2UM00
. This setting defines the programmable
H
H
Address
PBA + 000
H
PBA + 100
H
Chapter 18
Address for BPC =8FFB
03FE C000
H
03FE C100
H
H
553