Table of Contents
Advertisement
Chapter 23 On-Chip Debug Unit
23.1 Functional Outline
23.1.1 Debug functions
(1)
(2)
(3)
(4)
(5)
(6)
(7)
The microcontroller includes an on-chip debug unit. By connecting an N-Wire
emulator, on-chip debugging can be executed.
Debug interface
Communication with the host machine is established by using the DRST, DCK,
DMS, DDI, and DDO signals via an on-chip debug emulator. The
communication specifications of N-Wire are used for the interface.
On-chip debug
On-chip debugging can be executed by preparing wiring and a connector for
on-chip debugging on the target system. An on-chip debug emulator is used to
connect the host PC to the on-chip debug unit.
Forced reset function
The microcontroller can be forcibly reset.
Break reset function
The CPU can be started in the debug mode immediately after reset of the CPU
is released.
Forced break function
Execution of the user program can be forcibly aborted.
Hardware break function
Two breakpoints for instruction and data access can be used. The instruction
breakpoint can abort program execution at any address. The access
breakpoint can abort program execution by data access to any address.
Software break function
Up to four software breakpoints can be set in the internal code flash memory
area. The number of software breakpoints that can be set in the RAM area
differs depending on the debugger to be used.
User's Manual U18743EE1V2UM00
723
Advertisement
Table of Contents
