Nokia 7210 Configuration Manual page 82

CLI Usage
Platforms Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command enables port traffic monitoring. The specified ports statistical information is
displayed at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified ports. The subsequent
statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate per second for each statistic is displayed instead
of the delta.
Monitor commands are similar to show commands but only statistical information displays.
Monitor commands display the selected statistics according to the configured number of
times at the interval specified.
Parameters port port-id — Specifies up to 5 port IDs.
interval seconds — Specifies the interval for each display in seconds.
repeat repeat — Specifies how many times the command is repeated.
absolute — Keyword to display the raw statistics, without processing. No calculations
rate — Keyword to display the rate per second for each statistic instead of the delta.
Output The following output is an example of port statistics.
Sample Output
A:ALA-12>monitor# port 1/1/4 interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for Port 1/1/4
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Octets
Packets
Errors
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets
Packets
Errors
-------------------------------------------------------------------------------
82
Default 10 seconds
Values 3 to 60
Default 10
Values 1 to 999
are performed on the delta or rate statistics.
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Input
© 2021 Nokia.
Configuration Guide
0
39
0
0
39
0
3HE 17358 AAAB TQZZA
Output
0
175
0
0
175
0