Nokia 7210 Configuration Manual page 395

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
boot-good-exec
Syntax boot-good-exec file-url
no boot-good-exec
Context config>system
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description Use this command to configure a URL for a CLI script to exec following the success of a boot-
up configuration.
See the
file as if they were commands entered at the console.
Default no boot-good-exec
Parameters file-url — Specifies the location and name of the CLI script file executed following failure
allow-imm-family
Syntax allow-imm-family imm-family
no allow-imm-family
Context config>system>chassis
3HE 17358 AAAB TQZZA
exec command for related commands. This command executes the contents of a text
of the boot-up configuration file execution. When this parameter is not specified, no
CLI script file is executed.
Values file url — local-url | remote-url: 255 chars max
local-url — [cflash-id/ | usb-flash-id][file-path]
remote-url — [{ftp://} login:pswd@remote-locn/][file-path]
remote-locn — [hostname | ipv4-address]
usb-flash-id — uf1: (7210 SAS-M, 7210 SAS-T,
cflash-id — cf1:, cf2: (7210 SAS-T, 7210 SAS-Mxp,
Use subject to Terms available at: www.nokia.com
ipv4-address — a.b.c.d
7210 SAS-Mxp, 7210 SAS-Sx 1/10GE:
standalone and standalone-VC, and
7210 SAS-Sx 10/100GE)
uf1:, uf1-A:, uf1-B: (7210 SAS-R6 and
7210 SAS-R12)
7210 SAS-Sx 10/100GE, and 7210 SAS-Sx/
S 1/10GE: standalone and standalone-VC)
cf2:, cf2-A:, cf2-B: (7210 SAS-R6 and
7210 SAS-R12)
© 2021 Nokia.
System Management
395