Nokia 7210 Configuration Manual page 663

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Context show>system>script-control
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command displays script parameters.
Parameters script-name — Displays information for the specified script.
script-owner — Displays information for the specified script owner.
Output The following output is an example of script information, and
fields.
Sample Output
7210SAS>show>system>script-control# script
===============================================================================
Script Information
===============================================================================
Script
Owner name
Description
Administrative status
Operational status
Script source location
Last script error
Last change
===============================================================================
7210SAS>show>cron#
Table 91
3HE 17358 AAAB TQZZA
Output Fields: Script
Label Description
Script Displays the name of the script
Owner name Displays the owner name of the script
Description Displays the description of the script
Administrative Enabled — Administrative status is enabled
status
Disabled — Administrative status is disabled
Operational status Enabled — Operational status is enabled
Disabled — Operational status is disabled
Script source Displays the location of the scheduled script
location
Last script error Displays the system time of the last error
Last change Displays the system time of the last change
Use subject to Terms available at: www.nokia.com
: test
: TiMOS CLI
: asd
: enabled
: enabled
: ftp://*****:******@xxx.xxx.xxx.x/home/testlab_bgp
/test1.cfg
: none
: 2015/01/07 17:10:03
© 2021 Nokia.
System Management
Table 91 describes the output
663