Nokia 7210 Configuration Manual page 546

System Management
Table 56
mac-match-enable
Syntax mac-match-enable num-resources
no mac-match-enable
Context configure>system>resource-profile>ingress-internal-tcam>qos-sap-ingress-resource
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command allocates maximum resources for use by SAP ingress QoS policies using
MAC criteria (any).
The resources cannot be shared with policies that use either IPv4 or IPv6 match criteria.
Refer to the 7210 SAS-M, T, R6, R12, Mxp, Sx, S Quality of Service Guide for more
information about the resource allocation for SAP ingress QoS policy.
The no form of this command specifies that the software does not allocate any resources for
use by SAP ingress QoS policies using mac criteria. If no resources are allocated for use, the
software fails all attempts to associate a service entity (for example, SAP and IP interface)
with a SAP ingress QoS policy using this match criteria.
Parameters num-resources — Specifies the maximum amount of resources for use by this filter
546
Number of Resources Available for MAC-Match-Enable
Platforms
7210 SAS-Sx 1/10GE (per node)
(standalone)
7210 SAS-Sx 1/10GE (standalone-VC)
7210 SAS-S 1/10GE (per node) (standalone)
7210 SAS-S 1/10GE (standalone-VC)
7210 SAS-Sx 10/100GE (per node)
match criteria.
If the user specifies max, the software allocates one chunk when the first SAP is
associated with an ingress filter policy using this match criteria. It continues to
allocate resources to SAPs associated with SAP ingress QoS policy using this
criteria, as long as the total amount of resources allocated does not exceed the
resources allocated to SAP ingress QoS policies (configured with the config system
resource-profile ingress-internal-tcam qos-sap-ingress-resource command)
and chunks are available for use.
Values Table 57
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
lists the parameter values.
© 2021 Nokia.
Configuration Guide
Min value Max value
(per node) (per node)
0 6
0 5
0 6
0 5
0 4
3HE 17358 AAAB TQZZA
Default
Values
max
max
max
max
max