Table 46 Number Of Resources Available For Mac-Ipv4-Match-Enable - Nokia 7210 Configuration Manual
Service access switch 7210 sas-m, t, r6, r12, mxp, sx, s basic system
Hide thumbs
Also See for 7210:
- User manual (185 pages) ,
- Service manual (19 pages) ,
- Schematics (11 pages)
Table of Contents
Advertisement
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Description
This command allocates maximum resources for use by egress filter policies using IPv4
criteria or MAC criteria. The resources allocated are allocated on a first-come-first-serve
basis among service entities (for example, SAP and IP interface) using IPv4 and MAC criteria
egress filter policies.
The resources cannot be shared with any other egress filter policies that specify other match
criteria. Refer to the 7210 SAS-M, T, R6, R12, Mxp, Sx, S Router Configuration Guide for
more information on resource allocation and fields available for use.
The no form of this command specifies that the software does not allocate any resources for
use by egress filter policies using MAC or IPv4 criteria. If no resources are allocated for use,
the software fails all attempts to associate a service entity (for example, SAP and IP interface)
with a filter policy using this match criteria.
Default
mac-ipv4-match-enable 2 (to maintain backward compatibility with earlier releases)
Parameters
num-resources — Specifies the maximum amount of resources for use by this filter
Table 46
3HE 17358 AAAB TQZZA
match criteria. A minimum value of 2 (indicating two chunks of resources) must be
allocated to use this match-criteria. If not, association of a policy with mac and ipv4
criteria to a SAP will fail. It is mutually exclusive to use of SAP egress aggregate
meter.
Values
Table 46
Number of Resources Available for MAC-IPv4-Match-Enable
Platforms
7210 SAS-M (per node)
7210 SAS-T access-uplink mode (per node)
7210 SAS-T network mode (per node)
7210 SAS-S 1/10GE (per node) (standalone)
7210 SAS-Sx 1/10GE standalone-VC)
7210 SAS-S 1/10GE (per node) (standalone)
7210 SAS-S 1/10GE (standalone-VC)
7210 SAS-Sx 10/100GE (per node)
7210 SAS-R6 and 7210 SAS-R12 IMM-c (per
node)
7210 SAS-Mxp
7210 SAS-R6 IMMv1 and IMMv2
7210 SAS-R12 IMMv2
Use subject to Terms available at: www.nokia.com
lists the parameter values.
© 2021 Nokia.
System Management
Min value
Max value
(per node)
(per node)
0
2
0
2
0
2
0
2
0
2
0
2
0
2
0
2
0
2
0
2
0
2
0
2
Default
Values
0
0
0
0
2
0
2
2
2
0
0
0
523
Hide quick links:
Advertisement
Chapters
Table of Contents
