Boot Options
Default
Saves must be explicitly executed. BOF is saved at the same location as the location of
boot.tim used for booting the system.
Parameters
cflash-id — The compact flash ID where the bof.cfg is to be saved.
4.12.2.1.2
wait
Syntax
wait seconds
Context
bof
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description
This command configures a pause, in seconds, at the start of the boot process that allows the
user to interrupt system initialization at the console.
When the user interrupts system initialization, the user is allowed to manually override the
parameters defined in the BOF.
Only one wait command can be defined in the BOF.
Default
3
Parameters
seconds — Specifies the length of the pause at the start of the boot process, in seconds
188
• bof save
This configuration saves the BOF to the flash drive.
• bof save cf1:
This configuration saves the BOF to cf1:\.
Values
uf1: (7210 SAS-M)
cf1: | cf2: | uf1: (7210 SAS-T, 7210 SAS-Sx 1/10GE,
7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp)
cf2: | cf2-A: | cf2-B: | uf1: | uf1-A: | uf1-B: (7210 SAS-R6 and
7210 SAS-R12)
cf1: | cf2: (7210 SAS-S 1/10GE)
Default
cf1:
BOF Processing Control
Values
1 to 10
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA