Nokia 7210 Configuration Manual page 516

Service access switch 7210 sas-m, t, r6, r12, mxp, sx, s basic system
Hide thumbs Also See for 7210:
Table of Contents

Advertisement

System Management
The following guidelines are to be adhered while configuring the entry command.
The no form of this command removes the entry from the list of decommissioned ports. The
no form of this command requires a reboot to take effect.
The following examples show the list of ports, range of ports, and a combination of list of ports
and range of ports that can be specified.
List of ports can be specified as:
Range of ports can be specified as:
A combination of list of ports and range of ports can be specified as:
Parameters
entry-id — Specifies a number in the range 1 to 30. A maximum of 30 entries can be
516
• A port cannot be specified more than once in any of the entries. In other words, if two
entries specify the same port ID, the software errors out the last entry which has the
same port ID.
• A port appearing on the left-hand side of the to keyword in any entry cannot appear on
the right-hand side of any other entries (including the same entry) and the converse also
holds true.
• If the user has specified a group of ports using a port range, the software expands the
range to a list of ports and then makes the required checks (that is, checks listed in the
first and second bullets) for each port in the list with the list of currently configured group
of ports.
• Either a port ID or a list of port ID or port ID ranges can be specified on the left-hand side
and the right hand-side of the 'to' keyword. See the following description for port ID
specification to know more about the restrictions that apply when configuring a port
range and list of ports.
• The list of entries is processed in the ascending order of the entry IDs, that is, an entry
with a lower entry ID is processed before entry with a higher entry ID.
• 1/1/1, 1/1/2, 1/2/1, 1/1/10 is allowed
• 1/1/10, 1/1/2, 1/1/9, 1/1/5 is allowed
• 1/1/2-1/1/5 is allowed
• 1/2/1-1/2/2 is allowed
• 1/1/10-1/1/2 is not allowed
• 1/1/1 – 1/2/2 is not allowed
• 1/1/5,1/1/6,1/1/10-1/1/15,1/1/25 is allowed
• 1/1/5,1/1/6,1/1/10-1/1/12,1/1/13-1/1/15 is allowed
• 1/1/5,1/1/6,1/1/10-1/1/12,1/2/1-1/2/2 is allowed
created by the user.
Values
1 to 30
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas-mxp7210 r67210 r127210 s7210 sx7210 t

Table of Contents