Monitor Commands; Environment Commands; Command Descriptions - Nokia 7210 Configuration Manual

CLI Usage
2.9.1.3
monitor
2.9.1.4
root

2.9.2 Command Descriptions

54

Monitor Commands

— filter
— ip ip-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
— ipv6 ipv6-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute|rate]
— mac mac-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
— lag lag-id [lag-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
— port port-id [port-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
— router
— service
— id
service-id
— sap sap-id [interval seconds] [repeat repeat] [absolute | rate]
— sdp sdp-id [far-end] ip-address [interval seconds] [repeat repeat] [absolute | rate]
— management-access-filter

Environment Commands

— environment
— alias
alias-name alias-command-name
— no alias
alias-name
— [no] create
— [no] more
— reduced-prompt
— no reduced-prompt
— [no] saved-ind-prompt
— terminal
— length
lines
— width
width
— time-display {local | utc}
— [no] time-stamp
• Global Commands
• CLI Environment Commands
• Show Commands
• Monitor CLI Commands
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
[no of nodes in prompt]
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA