Nokia 7210 Configuration Manual page 140

Boot Options
Figure 8
When the both.tim file is successfully downloaded, control is passed from the
bootstrap image to the TiMOS image. The TiMOS image attempts to load the
configurations from the downloaded configuration file. If no configuration file location
is present in the BOF, the system is loaded with the default configuration.
Note: During the auto-init procedure, if the configuration file or image file download fails
from the network, the system reinitiates the auto-init process.
See
140
System Initialization: Bootstrap Process for Auto-init Mode
A
Auto-init mode
Send DHCP broadcast requests on
the uplink ports one port at a time
(designated for auto-init)
DHCP
No
response
received?
Yes
Receive IP, static route,
and BOF path in
DHCP response
Configure new IP address on the uplink
port on which DHCP response was
received and download BOF
No
BOF download
successful?
Yes
Yes
Save
BOF?
No
R
Restart
Auto-init Mode for more information about the auto-init mode process.
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Local image (both.tim)
found on flash?
Load and boot up with image;
wait 5 minutes for user intervention
CLI
command
auto-init stop?
B
Boot up
Configuration Guide
Yes
No
No
Save
BOF?
Yes
BOOT process complete
Send trap to SNMP
3HE 17358 AAAB TQZZA
sw0453