Nokia 7210 Configuration Manual page 488

System Management
Description This command performs a synchronization of the standby CPM's images and/or configuration
files to the active CPM. Either the boot-env or config parameter must be specified.
In the admin>redundancy context, this command performs a manually triggered standby
CPM synchronization. When the standby CPM takes over operation following a failure or
reset of the active CPM, it is important to ensure that the active and standby CPM have
identical operational parameters. This includes the saved configuration, CPM and XCMIOM
images.
The active CPM ensures that the active configuration is maintained on the standby CPM.
However, to ensure smooth operation under all circumstances, runtime images and system
initialization configurations must also be automatically synchronized between the active and
standby CPM. If synchronization fails, alarms and log messages that indicate the type of error
that caused the failure of the synchronization operation are generated. When the error
condition ceases to exist, the alarm is cleared.
Only files stored on the router are synchronized. If a configuration file or image is stored in a
location other than on a local compact flash, the file is not synchronized; for example, storing
a configuration file on an FTP server.
The no form of this command removes the parameter from the configuration.
Parameters boot-env — Keyword to synchronize all files required for the boot process (loader, BOF,
config — Keyword to synchronize only the primary, secondary, and tertiary configuration
display-config
Syntax display-config [detail | index]
Context admin
Platforms Supported on all 7210 SAS platforms as described in this document
Description This command displays the system's running configuration.
By default, only non-default settings are displayed.
Parameters detail — Displays default and non-default configuration parameters.
index — Displays only persistent-indexes.
force-switchover
Syntax force-switchover [now]
Context admin>redundancy
488
images, and config).
files.
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA