Nokia 7210 Configuration Manual page 201

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
uplinkA-port
Syntax uplinkA-port port-id
no uplinkA-port
Context bof
Platforms 7210 SAS-M (network mode and access-uplink mode), 7210 SAS-Mxp, 7210 SAS-Sx/S 1/
10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network mode and access-uplink mode)
Description This command configures the primary port to be used for boot up.
The no form of this command removes all the uplinkA parameters from the BOF.
Parameters port-id — Specifies the primary port to be used for boot up in the slot/mda/port format.
uplinkB-port
Syntax uplinkB-port port-id
no uplinkB-port
Context bof
Platforms 7210 SAS-M (network mode and access-uplink mode), 7210 SAS-Mxp, 7210 SAS-Sx/S 1/
10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network mode and access-uplink mode)
Description This command configures the secondary port to be used for boot up.
The no form of this command removes all the uplinkB parameters from the BOF.
Parameters port-id — Specifies the secondary port to be used for boot up in the slot/mda/port format.
uplinkA-route
Syntax [no] uplinkA-route ip-address/mask next-hop ip-address
Context bof
Platforms 7210 SAS-M (network mode and access-uplink mode), 7210 SAS-Mxp, 7210 SAS-Sx/S 1/
10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network mode and access-uplink mode)
Description This command configures an uplinkA static route.
Parameters ip-address — Specifies the IP address of the BOF. This address must be unique within
3HE 17358 AAAB TQZZA
the subnet and specified in dotted decimal notation.
Values a.b.c.d
Use subject to Terms available at: www.nokia.com
© 2021 Nokia.
Boot Options
201