Nokia 7210 Configuration Manual page 620

System Management
Table 75
620
Output Fields: System PTP
Label
Clock Type
PTP Profile
Domain
Network Type
Local Clock
Admin State
Oper State
Announce Interval
Announce Rx
Timeout
Clock Id
Clock Class
Clock Accuracy
Clock Variance
Clock Priority1
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Description
Displays the local PTP clock type:
• ordinarySlave — The system is always a slave clock in the
master-slave hierarchy. The system derives its timing from
one or more master clocks in the network.
• ordinaryMaster — The system is a grandmaster clock in the
master-slave hierarchy. The system provides timing to
multiple slave clocks in the network.
• boundary — The system is a boundary clock, which may be
anywhere in the master-slave clock hierarchy. It can obtain
timing from a master clock, and provide timing to multiple
slave clocks.
• transparent-e2e
Displays the PTP profile: ieee-1588, itu-telecom-freq,
g8275dot1- 2014, or g8275dot2-2016
Displays the PTP device domain
Indicates whether SONET or SDH values are being used for
encoding synchronous status messages
Up — The local PTP clock is administratively enabled
Down — The local clock is administratively shut down and not
running
Up — The local clock is operationally enabled and running
Down — The local clock is operationally disabled and not running
Displays the configured announce interval value
Displays the configured announce Rx timeout value
Displays a unique 64-bit number assigned to the clock
Displays the local clock class
Displays the local clock accuracy designation
Displays the local clock variance
Displays the first priority value of the local clock, used by the Best
Master Clock Algorithm (BMCA) to determine which clock should
provide timing for the network
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA