7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
#System Settings:
4.10.3.3
To access the CLI to configure the software for the first time, follow these steps.
See
4.10.3.4
To establish a console connection, you will need the following:
Table 23
Table 23
3HE 17358 AAAB TQZZA
uplinkB-speed
uplinkB-address
uplinkB-vlan
wait
persist
console-speed
no
console-disabled
Accessing the CLI
1. When the power to the chassis is turned on, the 7210 SAS software
automatically begins the boot sequence.
2. When the boot loader and BOF image and configuration files are successfully
located, establish a router connection (console session).
Console Connection
Console Connection
• an ASCII terminal or a PC running terminal emulation software set to the
parameters described in
• a standard serial cable connector for connecting to a RS232 port (provides a
RJ45 connector)
lists the console configuration parameter values.
Console Configuration Parameter Values
Parameter
Baud
Data bits
Parity
Stop bits
Flow control
Use subject to Terms available at: www.nokia.com
10000
0
0
3
off
115200
for information about establishing a console connection.
Table 23
Value
115,200
8
None
1
None
© 2021 Nokia.
Boot Options
165