Nokia 7210 Configuration Manual page 199

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Platforms 7210 SAS-M (network mode and access-uplink mode), 7210 SAS-Mxp, 7210 SAS-Sx/S 1/
10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network mode and access-uplink mode)
Description This command enables speed and duplex auto-negotiation on the uplinkB port in the running
configuration and the BOF.
The no form of this command disables the auto-negotiate feature on this port.
Note: The uplinkB-autoneg command is not valid for 10gig ports. Therefore, whenever the
user selects 10gig ports as uplinkB-port, the uplinkB-autoneg command defaults to no
uplinkB-autoneg, speed as uplinkB-speed 10000, duplex as uplinkB-duplex full, as shown
in the following output example.
#uplinkB Port Settings:
Default uplinkB-autoneg
uplinkA-duplex
Syntax uplinkA-duplex {full | half}
Context bof
Platforms 7210 SAS-M (network mode and access-uplink mode), 7210 SAS-Mxp, 7210 SAS-Sx/S 1/
10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network mode and access-uplink mode)
Description This command configures the duplex mode of the uplinkA port when auto-negotiation is
disabled in the running configuration and the BOF.
It also allows for the configuration of the duplex mode of the Ethernet port. If the port is
configured to auto-negotiate, this parameter will be ignored.
Note: The uplinkA-autoneg command is not valid for 10gig ports, therefore, whenever the
user selects 10gig ports as uplinkA-port, the uplinkA-autoneg command is defaulted to
no uplinkA-autoneg, speed as uplinkA-speed 10000, duplex as uplinkA-duplex full, as
shown in the following output sample.
#uplinkA Port Settings:
3HE 17358 AAAB TQZZA
uplinkB-port 1/1/26
no uplinkB-autoneg
uplinkB-duplex full
uplinkB-speed 10000
uplinkB-address 0
uplinkB-vlan 0
uplinkA-port 1/1/26
no uplinkA-autoneg
uplinkA-duplex full
Use subject to Terms available at: www.nokia.com
© 2021 Nokia.
Boot Options
199